Support: Application Notes

Gradient Braking Distance Performing brake tests on gradients
Speed Sensor Comparison Comparison of non-contact Speed Sensors
Marine Testing Using the Slip Angle Sensor on boats
VBOX USA Caterpillar Articulated vehicles
Brake Distances Evaluation of brake distance accuracy
Acceleration Tests Using RepGen to determine accel test results
Base Station Evaluation of increased positional accuracy
Brake Testing Brake tests with CAN wheel speed data
CAN Bus Operation CAN Bus communication with VBOX
CAN Format - VBOXII/PRO CAN Format for VBOXII and PRO v4
CAN Parameter List CAN Parameters for use with a VBOXIII, CAN01 or CAN02 Module
Center Line Deviation Measuring lateral deviation in vehicle trajectory using VBOX
Circuit Mapping Track mapping & post-processing line analysis
Coastdown Test Performing a coast-down test in a small area
Compact Flash Formatting Formatting CF cards for optimum use with VBOX
DAC01 and J1939CAN Bus Connecting DAC01 to J1939CAN Bus
VBOXIII and J1939CAN Bus Connecting VBOXIII to J1939CAN Bus
Distance Between Two Cars Accuracy evaluation whilst using two VBOXes
Lap Timing Measuring lap and split times
Magazine Tests Using MFD Configuration of vehicle tests with no PC
Setting Up Virtual Gates Defining start/finish lines and splits
Tire Temperature-Pressure Interfacing VBOX and tire measurement sensors
VBOX III CAN Format CAN communication protocols for VBOX III
VBOX II RS232 Format Serial Communication for VBOXII
Lat/Long Calculation How to convert latitude and longitude into degrees/minutes

© 2008 VBOX USA VBOX Products are designed and manufactured in England by Racelogic Ltd. Back to top